EVSE Day 5 – Electrician Exam Practice

EVSE Day 5

Think about materials like rubber or glass.

1 / 10

Insulators allow the free flow of electrical current.

a. True

b. False

Use Ohm’s Law (V=IRV = IRV=IR). If RRR is constant and VVV increases, what happens to III?

2 / 10

If a circuit has constant resistance and you increase the voltage, what happens to the current?

a. Current decreases

b. None of the above

c. Current stays the same

d. Current increases

Safety practices aim to minimize the risk of electrical accidents and injuries.

3 / 10

Which of the following is NOT a common safety practice when working with electrical systems?

a. Using insulated tools

b. Lockout tagout procedures

c. Wearing personal protective equipment (PPE)

d. Working on live circuits whenever possible

The formula P=VIP = VIP=VI comes from Watts Law.

4 / 10

Watts Law helps to determine which relationship?

a. Power, voltage, and current

b. Resistance, capacitance, and power

c. Voltage, resistance, and current

d. Frequency, voltage, and current

Voltage is sometimes referred to as "electric pressure" in a circuit.

5 / 10

What is voltage?

a. None of the above

b. The flow of charged particles like electrons

c. The force that pushes current and causes flow in a circuit

d. The number of electrons in a circuit

Electric current is measured in a unit that represents the flow of charge per second.

6 / 10

What is the basic unit of electric current?

a. Volt

b. Watt

c. Ampere

d. Joule

Overloading a circuit involves connecting more devices than it can safely handle, regardless of the individual power draw.

7 / 10

You can safely overload a circuit by plugging in multiple devices as long as they are not drawing a lot of power.

a. True

b. False

Parallel circuits are designed to provide multiple branches for current.

8 / 10

Parallel circuits have only one path for current to flow.

a. True

b. False

Ohm’s Law is represented by the formula V=IRV = IRV=IR.

9 / 10

What does Ohm's Law state?

a. Power is equal to voltage multiplied by current

b. Resistance remains constant under all conditions

c. Voltage is directly proportional to resistance

d. Current is directly proportional to voltage and inversely proportional to resistance

This type of supply adjusts for connected devices.

10 / 10

Constant voltage power supplies maintain steady voltage under varying ________.

a. Currents

b. Loads

c. Frequencies

d. Resistances

Your score is

Exit

Rate & Review

Thank you for taking the time to leave us a review! Your feedback is greatly appreciated and helps us improve our services.

Pos.	Name	Score	Duration
1	eep	100 %	1 minutes 20 seconds
2	Guest	100 %	2 minutes 19 seconds
3	eep	100 %	2 minutes 56 seconds
4	Guest	90 %	22 minutes 13 seconds
5	Guest	80 %	12 minutes 52 seconds

Electrician

Report a question

Leave a Reply Cancel reply