
What You’ll Learn
- The four stages the brain moves information through, from attention to action
- Why attentional resources are a limited pool — and why familiarity shrinks the mental workload of a task
- The three human performance modes in Rasmussen’s model: rule-based, knowledge-based, and skill-based
- Each mode’s signature error: misinterpretation, a faulty mental picture, and inattention with a perceived reduction in risk
- Why knowing which mode a worker is in tells you which mistakes to defend against
Four Stages Between the World and the Hand
Before a worker can act on a hazard, the brain has to process it. Annex Q.3 describes information processing as a series of interactive stages. Attention is where — and to what — we intentionally or unintentionally direct our concentration. Sensing is the intake: hearing, seeing, touching, and smelling receive information and transfer it onward. Encoding, storage, and thinking take that incoming information, code it, and hold it for later use in decision making; this stage runs on an interaction between working memory and long-term memory, which holds our capabilities, knowledge, past experiences, opinions, and perspectives. Finally, retrieval and acting convert the synthesis of attention, sensation, stored information, and thinking into physical action — changing the state of a component using controls, tools, and computers, or speaking to inform or direct others. Every error in the modes that follow can be traced back to something that went wrong inside this pipeline: attention aimed at the wrong thing, a sense that missed a cue, a stored picture that did not match reality, or an action taken on a faulty synthesis.
A Limited Pool of Attention
Most cognitive psychologists agree that humans divide their work out of attentional resources drawn from a limited, shared pool. The pool is what lets the mind process information while performing one task — or, sometimes, several at once — but it is finite, and tasks draw on it unevenly. The amount of attentional resource a task requires to be performed satisfactorily defines the mental workload for the individual, and that workload is inversely proportional to familiarity: as knowledge, skill, and experience with a task grow, the attention the task demands falls — and so does the attention the worker actually allocates to it. That trade is efficient right up until it is not. Critical points in an activity, where risk is higher — an increased likelihood of harm, an increased severity of harm, or both — require an increased allocation of attentional resources, and that allocation can be improved by training, procedures, equipment design, and teamwork. Rasmussen’s model, extended by Reason’s Generic Error Modeling System, classifies workers into three performance modes based on how they are handling a task; the individual selects a mode, consciously or subconsciously, based on his or her perception of the situation — usually a function of familiarity with the task and the level of attention being applied. Each mode carries its own associated errors, and knowing which mode a person is in helps identify the kinds of errors that could be made and which prevention techniques will work best.
Rule-Based Mode: If This, Then That
A worker is in rule-based mode when the situation is likely to be one he or she has encountered before, has been trained to deal with, or that is covered by a procedure. The mode is named for what the worker applies: memorized or written rules, learned through workplace interaction, formal training, or working alongside experienced people. Its logic is IF (symptom X), THEN (situation Y) — the worker matches the signs and symptoms of the situation to a stored knowledge structure and reacts in a usually predictable manner. The attentional demand sits between the other two modes, and the reaction time to select a response is on the order of seconds. In human performance theory, rule-based is the most desirable mode, because the individual can use conscious thinking to challenge whether the proposed solution is appropriate — which lets additional error prevention be built into the solution itself. One caution: not all procedure-guided activity is actually executed in rule-based mode. An experienced worker can unconsciously default to skill-based mode while performing a procedure that is normally done by rule. The signature error of the mode follows directly from its logic: because rule-based performance requires interpretation using if-then reasoning, misinterpretation is the prevalent error. Rule-based errors involve deviating from an approved procedure, applying the wrong response to a work situation, or applying the correct procedure to the wrong situation.
Knowledge-Based Mode: Thinking Without a Net
A worker is in knowledge-based mode when there is uncertainty about what to do — when no skill or rule is readily identifiable. The individual falls back on his or her understanding of the situation and on related scientific principles and fundamental theory to construct an appropriate response. Uncertainty creates a need for information, and to gather it more effectively the worker’s attentional resources become more focused. The cost is time and energy: thinking takes more effort, and the time devoted to processing information and selecting a response can run from minutes to hours. The mode’s prevalent error is that decisions are often based on an inaccurate mental picture of the work situation. Knowledge-based activity demands diagnosis and problem-solving, and humans do not usually perform optimally in high-stress, unfamiliar situations where they must think on their feet without rules, routines, or procedures to lean on. The tendencies are predictable: use only the information that is readily available to evaluate the situation, and become enmeshed in one aspect of the problem to the exclusion of all other considerations. Decision making is erroneous whenever the problem-solving rests on incomplete or inaccurate information — which is precisely the information a stressed worker in unfamiliar territory is most likely to have.
Skill-Based Mode: Fluent, Fast, and Exposed
A person is in skill-based mode when executing a task that involves practiced actions in a very familiar, common situation. Performance is governed by mental instructions developed through practice or experience, and it is less dependent on external conditions. Processing time collapses to the order of milliseconds — writing one’s signature is the classic example, and a familiar workplace procedure, such as operating a low-voltage molded case circuit breaker, is typically performed this way. The mode’s weakness is the mirror image of its strength: the demand on attentional resources is so low that two errors flourish. The first is inattention — skill-based errors are primarily execution errors involving omissions, triggered by human variability, or failures to recognize changes in task requirements or work conditions. The second is a perceived reduction in risk: as familiarity with a task increases, the individual’s perception of its risk is less likely to match the actual risk. That gap can create what the annex calls inattentional blindness — an insensitivity to the presence of hazards that are sitting in plain sight. The task has not become safer. The worker has simply stopped spending attention on it.
Worked Scenario
Three electricians, one substation, three modes. The first runs a switching sequence she has performed under procedure many times: she reads a lineup, matches it to the written rule for this configuration, and pauses to challenge whether the response fits before acting — rule-based mode, working in seconds, with misinterpretation as the error to guard against (her near-miss last year was applying the right procedure to the wrong bay, caught when a symptom did not match the rule’s expectation). The second is called to a feeder fault with symptoms nobody recognizes: no procedure covers it, so he reasons from first principles about what the protection is seeing, gathering information slowly and deliberately — knowledge-based mode, working in minutes, with an inaccurate mental picture as his exposure (his initial theory fixates on the relay and ignores the cable, until a colleague’s question widens the frame). The third racks a familiar breaker type he has operated hundreds of times, hands moving almost before thought — skill-based mode, working in milliseconds, where the danger is an omission: on this unit, an added interlock changes the sequence, and his practiced routine does not include it. Same building, same hour, three entirely different error profiles — which is why Annex Q treats mode awareness as a practical tool and not a theory.
Common Mistakes and Safety Notes
- Assuming procedure use means rule-based thinking. An experienced worker may default to skill-based mode while executing a procedure — and inherit skill-based errors, not rule-based ones.
- Judging a worker slow in knowledge-based mode. Minutes to hours of processing is the mode working as designed; pressure to speed up degrades exactly the diagnosis the mode exists to perform.
- Treating familiarity as a safety feature. Familiarity lowers attentional allocation; the skill-based errors — omissions and perceived reduction in risk — grow out of that efficiency.
- Defending against the wrong error. Misinterpretation, faulty mental pictures, and inattention need different countermeasures; identifying the mode identifies the defense.
- Ignoring critical points. Where likelihood or severity of harm rises, attentional allocation must rise with it — through training, procedures, equipment design, and teamwork, not hope.
Summary
Annex Q.3 explains that the brain processes information through attention, sensing, encoding and storage and thinking, and retrieval and acting — drawing on a limited pool of attentional resources, where mental workload falls as familiarity rises. Rasmussen’s model, extended by Reason, sorts workers into three performance modes. In rule-based mode, the worker applies memorized or written rules to familiar or procedure-covered situations in seconds, and errs by misinterpretation — deviating from a procedure, choosing the wrong response, or applying the right procedure to the wrong situation. In knowledge-based mode, no skill or rule fits, so the worker reasons from principles over minutes to hours, and errs by deciding from an inaccurate mental picture built on incomplete information. In skill-based mode, practiced actions run in milliseconds on minimal attention, and the errors are inattention — omissions and unrecognized changes — and a perceived reduction in risk that breeds inattentional blindness to hazards. Knowing the mode tells you which error to expect.
Quick-Check Questions
1. Name the four stages of information processing in Q.3.
Answer: Attention; sensing; encoding, storage, and thinking; and retrieval and acting.
2. How does familiarity with a task affect its mental workload?
Answer: The attentional resources a task requires are inversely proportional to familiarity — as knowledge, skill, and experience increase, the attention demanded, and allocated, decreases.
3. What is the prevalent error type in rule-based mode?
Answer: Misinterpretation — because the mode runs on if-then interpretation, its errors are deviating from an approved procedure, applying the wrong response, or applying the correct procedure to the wrong situation.
4. Why is knowledge-based decision making unreliable under stress?
Answer: Decisions rest on a mental picture of the situation that is often inaccurate; stressed workers in unfamiliar situations tend to use only readily available information and fixate on one aspect of the problem, so problem-solving proceeds from incomplete information.
5. What two errors does skill-based mode produce?
Answer: Inattention — execution errors and omissions, including failure to notice changed task requirements or conditions — and a perceived reduction in risk, which can cause inattentional blindness to hazards.
Based on NFPA 70E (2024), Informative Annex Q, paraphrased for study.
Video lesson for this module is in production — coming soon.
Quiz for this module is being prepared.
Flashcards for this module are being prepared.



