
What you’ll learn
After this post, you will be able to state Kirchhoff’s voltage law and Kirchhoff’s current law, and, given a circuit, solve for voltage and current using Kirchhoff’s laws.
When Ohm’s Law alone is not enough
Simple circuits yield to Ohm’s Law. Complex circuits — many sources, many branches — make Ohm’s Law alone impractical or impossible. Gustav Kirchhoff, a German physicist whose work the handbook dates to 1857, developed two laws that handle them. They are not new physics. They are bookkeeping: energy conservation written in volts, and charge conservation written in amps.
Kirchhoff’s voltage law (KVL): what goes up must come down
Around any closed loop, the sum of the voltage drops equals the sum of the voltage sources in that loop. Formula: ΣEsource = ΣIR, where the left side is the sum of the source voltages and the right side is the sum of the IR drops around the loop. A loop must have one or more voltage sources and must provide a complete path from any point around the loop back to that point. A simple series circuit is KVL in its simplest case: one loop, one source, and the drops add up to the source voltage — exactly as the series post showed. Applying KVL when the current direction is unknown: assume a direction. Sources that aid the assumed direction are positive; sources that oppose it are negative. A negative answer is not an error — it means the true direction is opposite to the one you assumed, with the magnitude still correct.
Kirchhoff’s current law (KCL): what flows in must flow out
At any junction, the current arriving equals the current leaving. Formula: IIN − IOUT = 0, or simply IIN = IOUT. At a junction, the total current entering the junction equals the total current leaving the junction. Charge cannot accumulate at a junction, so the bookkeeping must balance. The handbook’s signs matter here: count currents entering the junction as positive and currents leaving as negative, or the reverse, but be consistent — mixing the two will double-count.
Worked examples from the handbook
- One source: a loop with 80 volts and two resistors gives 80 = 20I + 10I, so 80 = 30I and I = 2.666 amps (about 2.7 amps). The drops are V1 = 20 × 2.666 = 53.3 volts and V2 = 10 × 2.666 = 26.7 volts, adding to 80 volts — the KVL check.
- Multiple sources: two opposing sources give 50 − 70 = 30I + 10I, so −20 = 40I and I = −0.5 amperes. The negative sign means the current flows in the opposite direction from the one assumed, with a magnitude of 0.5 amps.
- KVL and KCL combined: in a two-loop circuit, the loop equations are 2·Itotal + 6·I1 = 6 and 2·Itotal + 6·I2 = 0. Solving the pair gives Itotal = 3 amperes, I1 = 0 amperes, and I2 = −1 ampere. The two-loop circuit is the first step toward loop analysis, which the next post takes up in full.
Common mistakes
- “A negative current answer means I did the problem wrong.” It does not. It means the current flows in the opposite direction from the one you assumed; the magnitude is still correct.
- “KVL works on any path.” It applies only to closed loops — a complete path from a point back to itself. An open path is not a loop.
- “KCL is just common sense, so I can skip it.” In a single-loop circuit you can. In a multi-loop circuit, the junction equations are the only way to relate the branch currents.
- “The two laws are separate tricks.” They are the same conservation idea in two forms: KVL is energy conservation, KCL is charge conservation. Both are bookkeeping, not new physics.
Summary
Two bookkeeping laws for circuits too tangled for Ohm’s Law alone: around any closed loop, the voltage drops equal the voltage sources, and at any junction, the currents in equal the currents out. A negative answer is not an error — it is a direction clue. Both laws are conservation in disguise.
Quick-check questions
- What does Kirchhoff’s voltage law say?
- What does Kirchhoff’s current law say?
- A loop has 80 volts and two resistors giving 80 = 20I + 10I. What is the current?
- A calculation gives I = −0.5 amperes. What does that mean?
- Why are KVL and KCL described as conservation laws?
Answers: 1. Around a closed loop, the sum of the voltage drops equals the sum of the voltage sources in that loop. 2. At any junction, the current arriving equals the current leaving. 3. The current is 2.666 amps, or about 2.7 amps. 4. It means the current flows in the opposite direction from the one you assumed. 5. KVL is energy conservation in the form of voltages, and KCL is charge conservation in the form of currents.
Based on DOE-HDBK-1011/92, Electrical Science, Module 2, paraphrased for study.



