
What you’ll learn
After this post, you will be able to describe inductance and counter EMF, and explain why an inductor opposes a change in current flow.
A coil that remembers its current
An inductor is a circuit element that stores electrical energy as a magnetic field — usually a coil of wire around a permeable core. The field exists only while current flows. Stop the current and the field collapses; start it and the field has to grow. That growing and collapsing is where all the drama comes from, because a changing magnetic field makes a voltage.
Faraday’s Law and Lenz’s Law: the pushback
Faraday’s Law: a voltage is induced in a conductor when the conductor moves through a magnetic field, or the field moves past the conductor. Three things are needed to induce an EMF: a conductor, a magnetic field, and relative motion between the two. Faster motion — or a faster collapse or expansion of the field — means a greater induced EMF, and coiling the wire increases the induction. The handbook’s picture: with a switch closed, one wire carries current and makes a field, but no EMF appears in a nearby wire because there is nothing moving. Open the switch and the first wire’s field collapses; the collapsing field moves relative to the second wire, and an EMF is induced in it. Lenz’s Law: the induced EMF opposes the EMF or change that caused it, so an induced EMF is often called counter EMF (CEMF). In a single coil, opening the switch collapses the coil’s own field, inducing a voltage in the same coil whose polarity — by Lenz’s Law — tries to keep the original current flowing. Hence the handbook’s slogan: an inductor opposes a change in current flow.
Inductance in henries
Inductance (L), measured in henries (H), is the proportionality constant between CEMF and the rate of change of current: 1 henry means 1 volt of CEMF per 1 ampere-per-second change. Formula: CEMF = −L(ΔI/Δt), where the minus sign shows the CEMF polarity is opposite to the applied voltage. The voltage across an inductor is proportional to L times the rate of change of current, so at steady DC — no change — the counter EMF falls to zero exponentially and the inductor behaves essentially as its small winding resistance. Worked example from the handbook: a 4-henry inductor with current falling from 6 amperes to 2 amperes in 2 seconds has ΔI/Δt = −2 amperes per second, giving a CEMF of 8 volts in magnitude. Series and parallel rules mirror resistors: inductors in series add, and inductors in parallel combine reciprocally.
The 2,020-volt lesson
Worked example from the handbook: a switch closed puts 20 volts across an inductor’s small 1-ohm resistance, so 20 amperes flows and a large magnetic field builds up. Open the switch, and the inductor tries to keep those 20 amperes flowing momentarily through 101 ohms total — so the counter EMF is 101 × 20 = 2,020 volts. Then the CEMF and the current decay with a time constant of TL = L/R = 4 / 101 = 0.039 seconds. That is the safety lesson of this chapter: opening a switch in a highly inductive circuit can generate kilovolt-level counter EMF even from a 20-volt source — the reason inductive circuits need care, discharge paths, and properly rated switchgear.
Common mistakes
- “An inductor resists current.” It does not. It opposes a change in current. At steady DC it behaves essentially as its small winding resistance.
- “The counter EMF helps the applied voltage.” It opposes it — that is the minus sign in CEMF = −L(ΔI/Δt), and the whole point of Lenz’s Law.
- “A 20-volt circuit can only ever make 20 volts.” It can make far more. The handbook’s example makes 2,020 volts from a 20-volt source when the switch opens.
- “Inductors in parallel add like resistors in series.” No — inductors follow the same rules as resistors: series adds, parallel combines reciprocally.
Summary
An inductor is a coil that turns current into a magnetic field and then fights any attempt to change that current. Change the current and it pushes back with a voltage proportional to how fast you tried to change it — CEMF = −L(ΔI/Δt) — and when you switch a big inductor off, that pushback can be thousands of volts. Combine coils like resistors, and remember that any RL circuit settles exponentially.
Quick-check questions
- What does an inductor store energy as?
- What three things are needed to induce an EMF?
- What does Lenz’s Law say the induced EMF does?
- A 4-henry inductor has its current falling from 6 to 2 amperes in 2 seconds. What is the CEMF?
- Why can opening a switch in an inductive circuit make 2,020 volts from a 20-volt source?
Answers: 1. As a magnetic field, in a coil of wire around a permeable core. 2. A conductor, a magnetic field, and relative motion between the two. 3. It opposes the EMF or change that caused it. 4. 8 volts in magnitude. 5. Because the collapsing field tries to keep the 20 amperes flowing through 101 ohms, giving a counter EMF of 101 × 20 = 2,020 volts.
Based on DOE-HDBK-1011/92, Electrical Science, Module 3, paraphrased for study.
Top 10 Scorers
| Pos. | Name | Score | Duration |
|---|---|---|---|
| There is no data yet |
What does an inductor store electrical energy as?
A magnetic field
Question Explanation:
An inductor stores electrical energy as a magnetic field — usually a coil of wire around a permeable core.
What three things are needed to induce an EMF?
A conductor, a magnetic field, and relative motion between the two
Question Explanation:
Faraday's Law requires a conductor, a magnetic field, and relative motion between the two to induce an EMF.
What does Lenz's Law state?
The induced EMF opposes the EMF or change that caused it
Question Explanation:
Lenz's Law states that the induced EMF opposes the EMF or change that caused it, so it is often called counter EMF (CEMF).
What is the handbook's slogan for an inductor's behaviour?
An inductor opposes a change in current flow
Question Explanation:
Because the self-induced EMF tries to keep the original current flowing, the handbook's slogan is that an inductor opposes a change in current flow.
What is the formula for counter EMF?
CEMF = −L(ΔI/Δt)
Question Explanation:
CEMF = −L(ΔI/Δt): the induced voltage equals inductance times the rate of change of current, with the minus sign showing its polarity is opposite to the applied voltage.
A 4-henry inductor has its current falling from 6 amperes to 2 amperes in 2 seconds. What is the CEMF?
8 volts in magnitude
Question Explanation:
ΔI/Δt = (2 − 6) / 2 = −2 amperes per second, so CEMF = −4 × (−2) = 8 volts in magnitude.
How do inductors combine in series and in parallel?
Series adds; parallel combines reciprocally, mirroring resistors
Question Explanation:
Series inductors add, and parallel inductors combine reciprocally — the same rules as resistors.
In the handbook's worked example, a 20-ampere current through a 101-ohm total resistance on switch-off gives what counter EMF?
2,020 volts
Question Explanation:
To keep 20 amperes flowing momentarily through 101 ohms, CEMF = 101 × 20 = 2,020 volts.
What is the time constant in that 2,020-volt example?
0.039 seconds
Question Explanation:
TL = L/R = 4 henries / 101 ohms = 0.039 seconds.
Why does opening a switch in a highly inductive circuit need care?
It can generate kilovolt-level counter EMF even from a low-voltage source
Question Explanation:
Opening a switch in a highly inductive circuit can generate kilovolt-level counter EMF even from a 20-volt source — the reason inductive circuits need care, discharge paths, and rated switchgear.
- Tags:
- VOL2
People Who like this post


