
What You’ll Learn
- The two basic approaches to risk assessment that Annex F names, and the section that covers each
- How a hazard-based assessment works: characterize the workplace’s hazards first, then find the activities they touch
- Where hazard-based results earn their keep — designing, specifying, and purchasing electrical equipment
- How a task-based assessment works: break the job into discrete tasks and assess each task–hazard pair
- Why the task-based approach is the one used for field-level risk assessments, and how to choose between the two
Same Goal, Two Directions of Attack
Every risk assessment works toward the same end — estimate the risk, evaluate it, and control it — but Informative Annex F points out that an assessment can be scoped from either of two directions. A hazard-based risk assessment starts with the hazards present in a workplace and works outward to the activities they affect. A task-based risk assessment starts with a job and works inward, breaking it into tasks and finding the hazards attached to each one. Annex F.1 names these as the two basic approaches to risk assessment, and F.4 and F.5 treat each in turn. Neither replaces the other; they answer different questions, at different moments in the life of the equipment and the work. Choosing the right scope is what makes an assessment land on decisions somebody can actually use.
Hazard-Based: Start with the Hazards Themselves
In a hazard-based risk assessment, the workplace hazards are identified and characterized for four things: materials, processes, the worksite, and the environment. The point of the characterization is to understand the hazards as properties of the place and its equipment — what energy is present, in what form, and how severe it could be — before any particular job is in view. Only after that picture exists does the assessment identify the activities that might be affected by those hazards.
Each affected activity is then analyzed for the risk associated with it, in the usual two dimensions: the likelihood of harm and the severity of harm. Finally, the organization uses the assembled information to prioritize its risk reduction decisions. That last step is what distinguishes the approach — it produces a facility-wide ranking of where risk lives, so control effort and money can be directed at the hazards that matter most rather than spread evenly across everything.
Hazard-Based at Its Best: Design, Specification, Purchasing
The annex states plainly where hazard-based information pays off: it is useful to organizations when designing, specifying, and purchasing electrical distribution equipment. That is the moment when the most powerful controls are still available. Risk control is much more effective when it is applied at the beginning of the equipment or process lifecycle — before the hazard is bolted to the floor — than at any later point.
Concretely, a hazard-based study lets an organization buy its way down the hierarchy of risk control. Knowing the hazards a new lineup will present, specifiers can require substitution and engineering controls in the purchase documents — lower-energy designs, guarded and shrouded construction, features that reduce either the likelihood of harm occurring or the severity if it does. The assessment’s findings become requirements in a specification, and every worker who later operates or maintains that equipment inherits the benefit for the equipment’s whole life.
Task-Based: Start with the Job in Front of You
A task-based risk assessment reverses the direction. A job is broken down into its discrete tasks, and for each task the hazards are identified — producing what practitioners call task–hazard pairs: this step of the job, paired with this hazard. The risk associated with each hazard is then analyzed and evaluated, pair by pair, so the assessment follows the actual sequence of work a crew is about to perform.
Because the unit of analysis is the task, the output is immediately practical: for each step, the crew knows the hazard, the estimated risk, and the controls that step requires. The assessment lives at the level where work is planned and briefed — which is why this approach connects so naturally to job planning and the job briefing.
The Field-Level Method
Annex F.5 closes with a placement note: the task-based risk assessment is the most commonly used approach when performing a field-level risk assessment. That follows from its shape. A field assessment happens close to the work, often the same day, with a specific job on the table — and the questions it must answer are task-shaped: what will we do first, what can hurt us during that step, what controls does that step need. A workplace-wide hazard inventory cannot answer those questions step by step; a task breakdown can.
The two approaches also feed each other. A hazard-based characterization done at design or purchasing time supplies the hazard knowledge — incident energy levels, equipment condition factors, known problem spots — that later task-based assessments draw on when they evaluate a specific job against specific equipment. And recurring findings from task-based assessments are evidence the organization can roll back into its next round of specification and purchasing decisions.
Choosing the Scope
The choice is mostly a matter of timing and question. If the question is what hazards does this facility hold, and where should we invest to reduce them — asked while equipment is being designed, specified, or bought — the hazard-based scope fits. If the question is what will this crew face on this job, step by step — asked at the planning table or in the field — the task-based scope fits. Annex F presents both as legitimate approaches to the same underlying process of identifying hazards, analyzing likelihood and severity, and evaluating whether the risk can be accepted or needs treatment. Scoping wrong is its own failure mode: a field crew handed a facility hazard ranking still has to do the task breakdown before work, and a purchasing decision made from a single job’s task assessment will miss the hazards that job never touched.
Worked Scenario
One facility, both scopes, in the same year. In the spring, the plant is specifying a new switchboard lineup to replace an aging one. The team runs a hazard-based assessment: the distribution system’s hazards are characterized — available fault current and incident energy, the arc flash and shock exposure the lineup will present, the environment it will live in — and the activities the hazards affect, from routine operation to maintenance, are identified and analyzed for likelihood and severity. The results feed the purchase specification directly: the new lineup is ordered with engineering controls and lower-exposure design features that reduce the risk before the equipment ever arrives, and the findings set the plant’s priority order for the rest of its risk reduction budget. In the fall, a crew is planning tomorrow’s breaker replacement in that new lineup. Nobody re-runs the facility study. Instead the job is broken into discrete tasks — isolate and lock out, verify absence of voltage, rack the old breaker out, rack the new one in, restore and test — and each task is paired with its hazards and assessed on the spot: stored and induced energy at the verification step, manual handling and pinch hazards at the racking steps, re-energization risk at restoration. Controls are assigned per task–hazard pair, and the plan walks straight into the job briefing. The spring assessment decided what equipment the crew would be working in; the fall assessment decided how they would work in it tomorrow.
Common Mistakes and Safety Notes
- Using one approach for the other’s job. Hazard-based assessment informs design, specification, and purchasing; task-based assessment plans a specific job. Neither output substitutes for the other.
- Skipping the characterization step in a hazard-based study. Hazards must be characterized for materials, processes, the worksite, and the environment before activities are matched to them — a hazard list without characterization cannot support priority decisions.
- Assessing a job as one block. A task-based assessment breaks the job into discrete tasks and evaluates each task–hazard pair; hazards concentrate in particular steps, and a whole-job average hides them.
- Waiting until equipment is installed to assess its hazards. Risk control is far more effective at the beginning of the equipment or process lifecycle; a hazard-based study done after purchase can only rank problems it can no longer design out.
- Forgetting the prioritization output. A hazard-based assessment ends with the organization prioritizing risk reduction decisions — if the study changes nothing about what gets fixed first, it was paperwork, not assessment.
Summary
Annex F offers two ways to scope a risk assessment. The hazard-based approach of F.4 characterizes the workplace’s hazards across materials, processes, the worksite, and the environment, identifies the activities those hazards might affect, analyzes each activity for likelihood and severity of harm, and uses the results to prioritize risk reduction — information that earns its keep when designing, specifying, and purchasing electrical distribution equipment, when substitution and engineering controls can still be bought into the equipment at the start of its lifecycle. The task-based approach of F.5 breaks a job into discrete tasks, identifies the hazards of each as task–hazard pairs, and analyzes and evaluates the risk pair by pair — the approach Annex F identifies as the most commonly used for field-level risk assessment. Start from the hazard when the decision is about equipment; start from the task when the decision is about tomorrow’s work.
Quick-Check Questions
- What are the two basic approaches to risk assessment named in Annex F, and where is each treated?
Answer: The hazard-based approach (F.4) and the task-based approach (F.5). - In a hazard-based assessment, what is characterized, and for what four things?
Answer: The workplace hazards are identified and characterized for materials, processes, the worksite, and the environment. - Where does Annex F say hazard-based assessment information is especially useful?
Answer: When designing, specifying, and purchasing electrical distribution equipment — where risk control applied at the beginning of the lifecycle is much more effective. - What is a task–hazard pair?
Answer: In a task-based assessment, the result of breaking a job into discrete tasks and identifying the hazards of each task — one task paired with its hazard, analyzed and evaluated individually. - Which approach is most commonly used for a field-level risk assessment?
Answer: The task-based approach.
Based on NFPA 70E (2024), Informative Annex F, paraphrased for study.
Video lesson for this module is in production — coming soon.
Quiz for this module is being prepared.
Flashcards for this module are being prepared.



