
What you’ll learn
After this post, you will be able to write the lead-acid discharge and charge reactions, explain what happens to the acid and the plates in each direction, and explain why a charging battery can make explosive hydrogen.
A battery is stored chemistry
The purpose of a battery is to store chemical energy and convert it into electrical energy when needed. A lead-acid cell has three parts: a positive plate of lead peroxide (PbO₂), a negative plate of sponge lead (Pb), and an electrolyte of diluted sulfuric acid (H₂SO₄). Everything the battery does — discharging, charging, and gassing — is one chemical equation running in two directions.
Discharge: acid and lead become lead sulfate and water
When the battery discharges, the electrolyte divides into hydrogen (H₂) and sulfate (SO₄). The hydrogen combines with oxygen from the positive plate to make water (H₂O), reducing the acid in the electrolyte. The sulfate combines with the lead of both plates to form lead sulfate (PbSO₄). Net effect: electrolyte and active plate material are consumed; water and lead sulfate are produced; the acid content and the specific gravity fall. Equation (4-1): PbO₂ + Pb + 2H₂SO₄ → 2PbSO₄ + 2H₂O. The simple voltaic cell behind it: the zinc electrode holds an abundance of negative charge and the copper an abundance of positive charge. Immersed in electrolyte, chemical action begins — zinc dissolves into the electrolyte, accumulating a much larger negative charge, and positive electrolyte ions are repelled toward the copper, stripping electrons from it and leaving it positively charged. Connect a load across the electrodes and free electrons flow through the wire and load from negative to positive. The resulting potential difference makes the cell a source of applied voltage.
Charge: the same equation in reverse
Charging runs the reaction backwards. A charging current in the reverse direction drives lead sulfate out of the plates and back into the electrolyte as acid, and the specific gravity rises until all the acid is driven back. Net effect: water and lead sulfate are consumed; electrolyte and active material are restored. Equation (4-2): PbO₂ + Pb + 2H₂SO₄ ← 2PbSO₄ + 2H₂O — the same reaction reversed. That is why the hydrometer works: discharging turns acid into water, so the electrolyte gets lighter; charging turns water back into acid, so it gets heavier.
End-of-charge gassing: where the hydrogen comes from
Near full charge, the charging current exceeds what is needed to reduce the remaining lead sulfate, so the excess current ionises water instead: hydrogen (H₂) at the negative plate, oxygen (O₂) at the positive plate. Hydrogen is highly explosive — so charge with adequate ventilation, and keep smoking, sparks, and open flames away from a charging battery. This safety point is developed fully in the battery hazards post later in this module.
Common mistakes
- “Discharging uses up the battery.” It converts it. Acid and lead become lead sulfate and water — and charging converts them back. The battery is not consumed, it is transformed, and the transformation is reversible.
- “Charging adds acid to the battery.” It does not add anything. Charging drives the lead sulfate already on the plates back into the electrolyte as acid. Nothing new enters the cell.
- “The gas near full charge is just steam.” It is not. The excess current splits water into hydrogen at the negative plate and oxygen at the positive plate — and hydrogen is highly explosive.
- “Specific gravity rises steadily all the way through charging.” It does not rise uniformly. The decrease on discharge is proportional to ampere-hours discharged, but the rise on charge is not uniform or proportional to ampere-hours charged.
Summary
One equation, both directions: PbO₂ + Pb + 2H₂SO₄ ⇄ 2PbSO₄ + 2H₂O. Discharging turns acid and lead into lead sulfate and water, so the acid weakens and the specific gravity falls. Charging reverses it, restoring the acid and the plates. And near full charge, leftover current splits water into hydrogen and oxygen — so ventilate, and keep flames away.
Quick-check questions
- What are the three parts of a lead-acid cell?
- What does discharging produce?
- What does charging do to the lead sulfate on the plates?
- Why does specific gravity fall on discharge and rise on charge?
- What gas is produced at the negative plate near full charge, and why is it dangerous?
Answers: 1. A positive plate of lead peroxide (PbO₂), a negative plate of sponge lead (Pb), and an electrolyte of diluted sulfuric acid (H₂SO₄). 2. Lead sulfate (PbSO₄) and water (H₂O), while acid and active plate material are consumed. 3. It drives the lead sulfate out of the plates and back into the electrolyte as acid. 4. Because discharging consumes acid and makes water, so the electrolyte gets lighter; charging reverses it, restoring the acid. 5. Hydrogen (H₂) — it is highly explosive, so charging needs ventilation and no smoking, sparks, or open flames nearby.
Based on DOE-HDBK-1011/92, Electrical Science, Module 4, paraphrased for study.
Video lesson for this module is in production — coming soon.
Top 10 Scorers
| Pos. | Name | Score | Duration |
|---|---|---|---|
| There is no data yet |
What is the purpose of a battery?
To store chemical energy and convert it into electrical energy when needed
Question Explanation:
The purpose of a battery is to store chemical energy and convert it into electrical energy when needed.
What are the three parts of a lead-acid cell?
A positive plate of lead peroxide, a negative plate of sponge lead, and an electrolyte of diluted sulfuric acid
Question Explanation:
A lead-acid battery has a positive plate of lead peroxide (PbO₂), a negative plate of sponge lead (Pb), and an electrolyte of diluted sulfuric acid (H₂SO₄).
What is the discharge equation for a lead-acid cell?
PbO₂ + Pb + 2H₂SO₄ → 2PbSO₄ + 2H₂O
Question Explanation:
Equation (4-1), discharge: PbO₂ + Pb + 2H₂SO₄ → 2PbSO₄ + 2H₂O.
What does discharging a lead-acid battery produce?
Lead sulfate and water, while acid and active plate material are consumed
Question Explanation:
On discharge, electrolyte and active plate material are consumed; water and lead sulfate are produced; acid content and specific gravity fall.
What does charging do?
It drives lead sulfate out of the plates and back into the electrolyte as acid
Question Explanation:
A charging current in the reverse direction drives lead sulfate out of the plates and back into the electrolyte as acid; specific gravity rises until all acid is driven back.
What is the charge equation for a lead-acid cell?
PbO₂ + Pb + 2H₂SO₄ ← 2PbSO₄ + 2H₂O
Question Explanation:
Equation (4-2), charge: PbO₂ + Pb + 2H₂SO₄ ← 2PbSO₄ + 2H₂O — the same reaction reversed.
Why does specific gravity fall on discharge?
Because discharging consumes acid and produces water
Question Explanation:
Discharging consumes acid and produces water, so the acid content and specific gravity fall.
Near full charge, what happens to the excess charging current?
It ionises water: hydrogen at the negative plate, oxygen at the positive plate
Question Explanation:
Near full charge, charging current exceeds what is needed to reduce the remaining lead sulfate, so excess current ionises water: hydrogen (H₂) at the negative plate, oxygen (O₂) at the positive plate.
What safety precautions apply when charging a battery?
Adequate ventilation, and no smoking, sparks, or open flames near the charging battery
Question Explanation:
Hydrogen is highly explosive — adequate ventilation during charging, and no smoking, sparks or open flames near a charging battery.
In a simple voltaic cell, which way do free electrons flow when a load is connected?
From the negative electrode to the positive electrode, through the wire and load
Question Explanation:
Connect a load across the electrodes and free electrons flow through wire and load from negative (zinc) to positive (copper). The resulting potential difference makes the cell a source of applied voltage.
- Tags:
- VOL2
People Who like this post


